|Brand||Hawks Paints & Coatings Pvt Ltd|
Weathersheen Acrylic Exterior Hi-sheen & Anti Dirt Paint is a proven Quality algae and fungi resistance Exterior Emulsion Paint for high performance and lasting durability under severe weathering conditions. It is washable and has excellent adhesion, alkaline resistance, dirt pick up resistance, good colour fastness as well as can stands up well to efflorescence. It is a low VOC, APEO free and Formaldehyde free product.
Uses: Specially formulated for protection and decoration of exterior masonry and renderings, unpainted and previously painted surfaces such as plaster wall, Cement, gypsum board, brickwork, hard and soft boards and on appropriately primed wood surfaces.
WEATHERSHEEN is alkali resistant and protects the paint film from alkali-erosion. High quality anti-microbial additives are used to make WEATHERSHEEN a hi-anti fungal paint protecting the surface from Algae, mildew & mould.WEATHERSHEEN pure acrylic Latex paint is a complete water resistant exterior paint. WEATHERSHEEN allows uniform breathing action, which lets vapour to escape, hence reduces peeling problem and makes the surface resistant to chalking & blistering.
SURFACE PREPARTION: Make the surface clean and free from loose particles and any growth of moss, algae or fungus by vigorous wire brushing. Wash the surface clean with water. Horizontal areas like top of awnings, parapets sunshades, where water normally accumulates of ponds, should be well repaired to prevent such accumulation. Any damage in the structure, cracks or voids which may cause water penetration should be repaired before application. Large voids or cracks should be filled or repaired with our HAWKSEAL-SUPER, for cracks or voids use HAWKSEAL-KS*
*HAWKSEAL-KS is white cement based Crack Filler* and HAWKSEAL-KS is an Acrylic Based highly Adhesive sealing compound that is used for sealing of crack & voids for stopping leakage & seepage completely.
WEATHERSHEEN is a self priming paint; apply one priming coat by thinning the paint with equal volume of water (1:1)
APPLICATION: Stir well WEATHERSEEN inside the bucket itself before emptying the contents. Dilute 8 Lit. clean water for 20 Lit. Bucket stir well to form a consistent solution for painting. Use brush or roller to apply on to the surface. Drying time of 4-5 hours is recommended between coats. Coverage area is approximate 5 to 7 sq.mtr. per Lit. for a two coat finish depending on surface conditions and varies according to texture, suction or porosity and method of application. Horizontal surfaces like awnings, parapets and sunshades should be painted with additional coat for ideal protection.
ENVIROMENT FRIENDLY & SAFE: WEATHERSHEEN is an environmentally friendly acrylic paint.
Being non-flammable, WEATHERSHEEN does not carry any risks to life. Any Splash of the paint
when in contact with skin or eye should be immediately washed away with clean water. If irritation persists, take medical help.